Our best selling professional sewage sump station.

We designed this chamber with the installer in mind. It comes fully built up with no special tools required to install. The chamber is 70cm diameter x 65cm tall. We have incorporated a 450mm diameter standard riser x 15cm tall into our design. This can accept most standard off the shelf risers if the installer needs to extend it. We supply a round 450mm plastic inspection chamber frame and lid, which can easily be changed for a other standard lid, for example a recessed lid or a double sealed lid.

The squat design of the chamber means that the installer doesnt have to dig too deep to install. 2 anti floatation rings at the top and bottom of the chamber prevent the systems from lifting out of the floor once installed.

All four 110mm inlets are pre drilled and fitted with 110mm rubber EDPM seals.

3 off 110mm blanking plugs are supplied for any unused inlets.

This chamber is fitted with 2 off Pedrollo VX 10/50 Vortex 750w automatic pumps. Their float switch design, means that the float will always operate even if the cable length is shortened to zero. These pumps have a max head of 9m and 520l per min flow. Mid curve performance is 6.8m with 300 l/min.

Supplied with the chamber is our Duplex Up alternating control panel and 2 off sewage float switches to control the pumps.

We have deisnged and installed into our chamber a clean water supply. This is a unique design feature of our products. The installer simply connects a mains water supply to the chamber with an isolation valve. This enables the quick and easy commisioning of the pumps and future servicing. No longer will you have to drag a dirty hose pipe through the clients property to test the pumps.

We fit our chambers with a full height aluminium float switch slide which will enable the installer to fit multiple float switches with infinte adjustment possibilities.